Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on the Holden Barina Spark

Model: Holden Barina Spark MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Spark plugs

Video tutorial

In today's tutorial video, follow the steps to remove and replace the spark plugs on the Holden Barina Spark, as outlined below. First, open the hood of your car and begin removing the plastic cover above the cylinder head; then disconnect the electrical connectors from the spark plugs, as shown in the video.

At this point, use a socket wrench with an extension to unscrew and remove the spark plugs, replacing them with new ones (of the correct type and with the same thread); then reassemble everything!


Updated on 3 August 2026 by ScegliAuto


Related tutorials

How to Find the OBD Port on the Holden Barina Spark
How to Find the OBD Port on the Holden Barina Spark
Holden Barina Spark (2009-2015 / MK 1) The Holden Barina Spark is a vehicle that is not imported to Europe. It is a popular car in Australia, and like all cars from that part of the world,…
How to Replace the Alternator on the Holden Barina Spark?
How to Replace the Alternator on the Holden Barina Spark?
Holden Barina Spark (2009-2015 / MK 1) To replace the alternator on the Holden Barina Spark, open the hood to access the components inside the engine compartment. You will need to remove a…
How to Remove the Stock Radio from a Holden Barina Spark
How to Remove the Stock Radio from a Holden Barina Spark
Holden Barina Spark (2009-2015 / MK 1) Removing the stock radio, perhaps to install a more updated one, from a Holden Barina Spark is very simple. Just have a plastic trim tool to help rem…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos