Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Stock Radio from a Holden Barina Spark

Model: Holden Barina Spark MK 1 - Years 2009-2015
Part: Car stereo

Removing the stock radio, perhaps to install a more updated one, from a Holden Barina Spark is very simple. Just have a plastic trim tool to help remove the outer frame without damaging it, as it will need to be reinstalled on the new radio. Unscrew the support screws of the radio you intend to remove: carefully pull it out, as there are connectors behind that you will need to reconnect to the new radio. Disconnect them and set them aside for the new unit. If you plan to install a Bluetooth screen radio, some additional wiring will be necessary.

Updated on 21 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Find the OBD Port on the Holden Barina Spark
How to Find the OBD Port on the Holden Barina Spark
Holden Barina Spark (2009-2015 / MK 1) The Holden Barina Spark is a vehicle that is not imported to Europe. It is a popular car in Australia, and like all cars from that part of the world,…
How to Replace the Alternator on the Holden Barina Spark?
How to Replace the Alternator on the Holden Barina Spark?
Holden Barina Spark (2009-2015 / MK 1) To replace the alternator on the Holden Barina Spark, open the hood to access the components inside the engine compartment. You will need to remove a…
How to Reset the Oil Light on a 2015 Holden Barina Spark
How to Reset the Oil Light on a 2015 Holden Barina Spark
Holden Barina Spark (2009-2015 / MK 1) If the oil light appears on the dashboard of your 2015 Holden Barina Spark even after you have recently changed the oil and filter, don't worry becau…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos