Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant Reservoir on the Holden Barina Spark

Model: Holden Barina Spark MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015

Video tutorial

In today's tutorial video, you will learn how to remove and replace the coolant reservoir on the Holden Barina Spark. First, open the hood of your car and start disconnecting the two hoses from the coolant reservoir by pressing on the side clamps; then use a socket wrench with an extension to remove the four screws at the base, as shown in the video.

At this point, remove the reservoir and install the new one, securing it properly; connect the hoses and top off the coolant!


Updated on 28 July 2026 by ScegliAuto


Related tutorials

How to Find the OBD Port on the Holden Barina Spark
How to Find the OBD Port on the Holden Barina Spark
Holden Barina Spark (2009-2015 / MK 1) The Holden Barina Spark is a vehicle that is not imported to Europe. It is a popular car in Australia, and like all cars from that part of the world,…
How to Replace the Alternator on the Holden Barina Spark?
How to Replace the Alternator on the Holden Barina Spark?
Holden Barina Spark (2009-2015 / MK 1) To replace the alternator on the Holden Barina Spark, open the hood to access the components inside the engine compartment. You will need to remove a…
How to Reset the Oil Light on a 2015 Holden Barina Spark
How to Reset the Oil Light on a 2015 Holden Barina Spark
Holden Barina Spark (2009-2015 / MK 1) If the oil light appears on the dashboard of your 2015 Holden Barina Spark even after you have recently changed the oil and filter, don't worry becau…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos