Do it yourself
Frequently asked questions about cars and motorcycles
To change the motor oil of a Honda Gold Wing, start by running the engine for a few minutes, allowing the oil to warm up and flow better. Then, turn off the motorcycle and make sure it is positioned on a flat and stable surface. Locate the oil drain plug under the engine, and place a large container underneath it to collect the used oil. Use a wrench to unscrew the plug and let the oil drain completely. Once drained, reattach the plug, making sure it is tightly secured to avoid leaks. Fill the engine with the specified new oil for the Gold Wing, being careful not to exceed the recommended level. After filling, start the engine again for a few minutes, turn it off, and check for any leaks and ensure that everything was done correctly.

Posted on 28 August 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

Gold Wing 1500 In order to replace the front brake pads of the Honda Gold Wing 1500, you need to loosen the screws that secure the brake caliper to the correspondin…
Gold Wing 1500 Warm the engine for a few minutes before starting the procedure to make the oil less viscous and easier to drain. For the same reason, first unscrew …

How to Top Up the Oil in the Aprilia SR 50 R Scooter?

In this tutorial, you will see how to top up the oil in the Aprilia SR 50 R scooter, a very simple and quick operation to perform periodically. First, open the small lower compartment and retrieve the supplied tools, then remove the screws securing the front panel located at the back. Once removed, locate the oil reservoir, which is on your left, and unscrew the cap. At this point, proceed to top up the oil until you reach the optimal level, then reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos