Do it yourself
Frequently asked questions about cars and motorcycles
Today's steps will show us the process of disassembling and replacing the rear brake pads of the Honda Forza 125 scooter. First, we put the scooter on the center stand and start unscrewing the fixing screws of the rear brake caliper, in order to remove it from the disc; then we press the caliper piston to remove the old pads, as shown in the video. At this point, we clean off any remaining dirt and install the new original brake pads, finally reassembling the rear brake caliper on the disc!

Posted on 11 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Forza 125 The following steps will show us the process of disassembling and replacing the front brake pads of the Honda Forza 125 scooter. First, we put the sc…
Forza 125 You can replace the front brake pads on the Honda Forza 125 by loosening the bolts that secure the caliper to the corresponding disc: this will allow…
Forza 125 It will be possible to replace the exhaust of the Honda Forza 125 by loosening the screws that fix the exhaust terminal to its housing: once the corr…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos