Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery on Honda SH 125

Model: Honda Sh 125i
Part: Battery

Video tutorial

Make sure that the scooter is turned off and positioned on the center stand. Remove the plastic cover on the footrest to access the battery compartment.

Unscrew the screws of the central bracket that secures the battery. Disconnect both battery terminals, starting with the negative pole (-) and then the positive pole (+). Remove the battery from the compartment.

Place the new battery in the compartment, making sure it is in the correct position. Connect the positive terminal first and then the negative one. Reassemble the plastic cover and screw the screws with an Allen key. Check: check the integrity of the fuses located in the compartment next to the battery and verify the operation of the new battery.


Posted on 14 January 2025 by ScegliAuto


Related tutorials

How to Set the Time on Honda SH 125 Scooter?
How to Set the Time on Honda SH 125 Scooter?
Sh 125i In this tutorial, learn how to set the time on the Honda SH 125 scooter, a very simple and quick operation, for example, after switching to daylight …
How to Replace the Battery on a Honda SH 125
How to Replace the Battery on a Honda SH 125
Sh 125i This guide shows how to remove and replace the battery of the Honda SH 125 scooter, following the instructions below. First, place your scooter on th…
How to Change the Engine Oil on a Honda SH 125 Scooter
How to Change the Engine Oil on a Honda SH 125 Scooter
Sh 125i Changing the engine oil on a Honda SH 125 scooter, as shown in this tutorial, is an extremely simple and quick task. First, wait until the engine is …

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos