Do it yourself
Frequently asked questions about cars and motorcycles

Resetting the service light on the Honda SH 125

Model: Honda Sh125i
Part: Service warning light

Video tutorial

Close to reaching the mileage expected for the oil change according to the maintenance plan of the Honda SH 125, the message "Oil Change" appears on the instrument panel to remind us to carry out this operation. After replacing the oil, we proceed to reset the notification system.

We turn on the instruments, make sure that the total odometer is selected on the display, press the Trip and Clock buttons simultaneously, located on the sides of the display, for a few seconds until the "Oil Change" message disappears. Turn off the instrument panel to complete the reset.


Posted on 9 April 2025 by ScegliAuto


Related tutorials

Sh125i To manually reset the engine oil change light on your Honda SH 125, follow the instructions in this guide. First, completely switch off the motorcycl…
Sh125i In this video, see how to correctly fit the Thermoscud on the Honda SH 125 and SH 150 models from 2017 onwards: open it and lay it over the seat, ens…
Sh125i In this video, see how to change the engine oil in a Honda SH 125: it is essential to obtain a good synthetic oil SAE 10W40. Place a large container …

How to Set the Clock on the Yamaha Xmax 300?

On the Yamaha Xmax 300, you can adjust the clock by turning on the instrument panel, inserting the key into the ignition switch. Once the panel is powered, press and hold the button located on the right side of the handlebars, just below the red button. You will notice the hours start to flash, and you can change them by repeatedly pressing the same button. After a few seconds, the minutes will also start to flash, which can be adjusted using the same method.

Watch the video!


by ScegliAuto

More videos