Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit the Thermoscud on Honda SH 125 and SH 150

Model: Honda Sh125i
Part: Checks and maintenance

Video tutorial

In this video, see how to correctly fit the Thermoscud on the Honda SH 125 and SH 150 models from 2017 onwards: open it and lay it over the seat, ensuring the logo faces the front of the shield. Next, bring the Thermoscud close to the steering column and secure it at the front.

There are two screws to remove, which will pass through a hole in the Thermoscud. Then, attach the straps along the wheel arch of the bodywork, corresponding to the three fasteners, as simply illustrated in the video; of course, repeat the same steps on the other side.

One last strap must be connected to the one from the other side, threading the appropriate extension through a gap in the footwell to ensure it is secure. Now, inflate the anti-flap system via the supplied non-return valve.

The Thermoscud is now fitted: only the smartphone pocket remains.


Updated on 12 September 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light of the Honda SH 125
How to Reset the Oil Light of the Honda SH 125
Sh125i To manually reset the engine oil change light on your Honda SH 125, follow the instructions in this guide. First, completely switch off the motorcycl…
Resetting the service light on the Honda SH 125
Resetting the service light on the Honda SH 125
Sh125i Close to reaching the mileage expected for the oil change according to the maintenance plan of the Honda SH 125, the message "Oil Change" appears on …
How to Change the Oil in a Honda SH125
Sh125i In this video, see how to change the engine oil in a Honda SH 125: it is essential to obtain a good synthetic oil SAE 10W40. Place a large container …

Removing and Replacing the Battery of the Harley Davidson Iron 883

In this video, follow the instructions to remove and replace the battery of the Harley Davidson Iron 883. First, place your motorcycle on the stand and remove the rider's seat. Next, disconnect the electrical connector located on the side and undo the fixing screw of the battery bracket using a socket spanner with an extension, as shown in the video. At this point, disconnect the battery wiring to remove it and replace it with the new one, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos