Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Dio
Part: Engine oil

It will be possible to replace the engine oil of the Honda Dio by loosening the drain plug of the oil pan located in the central lower part of the vehicle: it will be necessary to completely drain the engine oil so that it is collected in a properly positioned container. At this point, it will be possible to proceed by removing the oil filter located in the central lower part of the vehicle: it will now be possible to insert the new replacement part. Finally, it will be possible to top up by pouring the oil from the breather on the right side of the motorcycle.

Posted on 11 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a Honda Dio
How to Change the Engine Oil on a Honda Dio
Dio To change the engine oil on a Honda Dio, loosen the drain plug located at the bottom of the bike, near the beginning of the exhaust. This will allow …
How to replace the engine oil in the Honda Dio scooter?
How to replace the engine oil in the Honda Dio scooter?
Dio In this tutorial we can see how to replace the engine oil in the Honda Dio scooter, an extremely simple and quick operation, to be carried out every …
How to replace the engine oil in the Honda Dio scooter?
How to replace the engine oil in the Honda Dio scooter?
Dio In this tutorial we can see how to replace the engine oil in the Honda Dio scooter, an extremely simple and quick operation, to be carried out every …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos