Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Pcx 125
Part: Windshield

In this video, we see how to install the windshield on a Honda PCX: it is not as easy as it may seem, but it is still doable. We can find it, for example, on eBay with the code 17035299225 at the price of 57.10 euros, free delivery. First, we need to remove the original windshield, unscrewing the screws starting from the bottom, then using a plastic spatula to lever out the shield, pulling it downwards. After that, we can remove the other screws holding the original windshield in place. We put the side supports in the appropriate holes and then position the two sealing plates, one on each side, fixing them with their nuts. We put the shield back in place, as the windshield will rest on its brackets. We position the windshield and secure it with its nuts: if everything is in place, the handles will be able to turn without hitting the windshield. Job done.

Posted on 26 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Instrument Cluster on the Honda PCX Scooter?
How to Remove the Instrument Cluster on the Honda PCX Scooter?
Pcx 125 In this tutorial, you will see how to remove the instrument cluster on the Honda PCX scooter, a very simple and quick operation. First, ensure that t…
How to adjust the clock of the Honda PCX 125
How to adjust the clock of the Honda PCX 125
Pcx 125 Adjusting the time on the Honda PCX 125 motorcycle is a simple and quick operation to be carried out independently, thanks to our short video tutoria…
How do you set the clock on the Honda PCX 125?
How do you set the clock on the Honda PCX 125?
Pcx 125 To set the clock on the Honda PCX 125, you need to turn on the instrument panel by inserting the ignition key into the corresponding block: once the …

How to Replace the Clutch on a Triumph Speed Triple?

To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, namely the starter motor, the engine, and then the clutch. Once these covers are removed, you can access the bolts securing the clutch, unscrew them, and slide the clutch plates out of their housing. This will allow you to insert the new plates into their place, securing everything with the appropriate bolts; finally, reinstall all the casings.

Watch the video!


by ScegliAuto

More videos