Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of a Honda Pcx 125

Model: Honda Pcx 125
Part: Battery

Video tutorial

Replacing the battery of a Honda PCX 125 scooter does not require a complicated procedure. The first thing to do is to unlock the seat of the motorcycle to access the battery compartment; the latter is covered by a plastic panel located on the front wall of the under-seat.

At this point, use a screwdriver with a star tip and remove the screw that holds the panel in place and then remove the panel itself. Once the cover is removed, you will have access to the battery, you will need to unscrew the screws on the metal bars above the battery and then proceed to remove the clamps.

Make sure to disconnect the negative pole first and then the positive one. Remove the battery and proceed with its replacement, in this case remember to connect the positive pole first and then the negative one.


Posted on 6 July 2025 by ScegliAuto


Related tutorials

How to replace the battery in a Honda PCX 125 scooter?
How to replace the battery in a Honda PCX 125 scooter?
Pcx 125 In this tutorial, you will see how to replace the battery in a Honda PCX 125 scooter, a very simple and quick operation. Before proceeding, ensure th…
How to replace the battery in the Honda PCX 125 scooter?
How to replace the battery in the Honda PCX 125 scooter?
Pcx 125 In this tutorial we can see how to replace the battery in the Honda PCX 125 scooter, an extremely simple and fast operation. First of all, make sure …
How to Replace the Battery on a Honda PCX 125
How to Replace the Battery on a Honda PCX 125
Pcx 125 This brief video tutorial shows all the steps necessary to replace the battery on a 2018 Honda PCX 125. First, lift the seat of your scooter; you wil…

How to Dismantle the Engine of a Piaggio Zip?

To dismantle the engine block of the Piaggio Zip, first extract it from its housing: once removed, you can proceed by loosening the screws that secure the side casing and also removing the spark plug from the top of the cylinder. This way, you can unscrew the bolts that secure it to its seat and then loosen the bolts that attach the connecting rod to the piston. By removing the piston itself, you can also dismantle the connecting rod and subsequently remove all other components located inside the engine block.

Watch the video!


by ScegliAuto

More videos