Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
It will be possible to replace the gearbox oil of the Honda Vision 110 by loosening the drain plug located at the bottom rear of the transmission housing: once the plug has been removed, it will be possible to collect all the old oil in a properly positioned container. Once all the oil has drained out, you can start topping up: you will need to pour the necessary amount of fluid through the top breather, using a pump to help. After topping up, you will need to check that everything is functioning properly.

Posted on 12 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a Honda Vision 110
How to Change the Engine Oil on a Honda Vision 110
Vision 110 To replace the engine oil on the Honda Vision 110, unscrew the bolt located at the bottom of the bike, which closes the oil drain plug; once opened, …
How to Change the Engine Oil in a Honda Vision 110?
How to Change the Engine Oil in a Honda Vision 110?
Vision 110 To change the engine oil in a Honda Vision 110, unscrew the bolt located at the bottom of the bike, which closes the oil drain plug; once opened, you…
How to Change the Engine Oil of the Honda Vision 110?
How to Change the Engine Oil of the Honda Vision 110?
Vision 110 On the Honda Vision 110, to change the engine oil, loosen the bolt located at the bottom of the bike that seals the oil drain plug. Once opened, coll…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos