Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Sp 125
Part: Clock

If you own a Honda Sp 125 and want to learn how to manually adjust the time displayed on the central panel, all you have to do is follow the steps described in the following guide. First, insert the key and turn on the panel if it is still off, then locate the two buttons located to the left and right of the panel and hold them down simultaneously for a few seconds. Then release them and press the right button to select the hours and use the left button to change the displayed number. Repeat the same procedure for the minutes and you're done.

Posted on 14 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service indicator of the Honda Sp 125
How to reset the service indicator of the Honda Sp 125
Sp 125 If the service light on the central panel of your Honda Sp 125 continues to light up even though you have recently had a service, don't worry because…
How to Set the Time on the Honda SP 125?
How to Set the Time on the Honda SP 125?
Sp 125 In this tutorial, you will see how to set the time on the Honda SP 125, a very simple and quick operation, to be done for example after disconnecting…
How to Change the Engine Oil in a Honda SP 125
How to Change the Engine Oil in a Honda SP 125
Sp 125 In this tutorial, we will see how to change the engine oil in a Honda SP 125, a very simple and quick operation to perform every 12 months. First, en…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos