Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the coolant in the Honda SH 150 scooter?

Model: Honda Sh 150
Part: Antifreeze coolant

Video tutorial

In this tutorial we can see how to replace the coolant in the Honda SH 150 scooter, a very simple operation. First of all, make sure that the engine is completely cold, then remove the entire lower right fairing and remove the radiator partition.

Next, unscrew both the lower cap and the upper cap, let all the liquid inside the radiator drain out, and then continue by unscrewing the bolt of the cylinder exhaust. At this point, all that's left to do is to empty the tank, reassemble everything, and add the necessary amount of coolant to reach the ideal level.


Posted on 5 August 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Honda SH 150 Scooter?
How to Reset the Service Light on the Honda SH 150 Scooter?
Sh 150 Resetting the service light on the Honda SH 150 scooter, as shown in this tutorial, is a very simple and quick operation. Before proceeding, ensure t…
How to reset the service on the Honda SH 150 scooter?
How to reset the service on the Honda SH 150 scooter?
Sh 150 Resetting the service on the Honda SH 150 scooter, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, we …
How to Replace the Front Headlamp Bulb on a Honda SH 150 Scooter
How to Replace the Front Headlamp Bulb on a Honda SH 150 Scooter
Sh 150 Replacing the front headlamp bulb on a Honda SH 150 scooter is an extremely simple and quick task. First, ensure the key is not in the ignition. Then…

How to Replace the Headlight Bulb on the Suzuki Address 110

To replace the headlight bulb on the Suzuki Address 110, you must completely remove the wing mirrors so that you can rotate them counterclockwise: once removed, proceed to loosen the screws securing the front fairing, located at the sides of the instrument cluster. Once the front fairing is removed, disconnect the internal connector of the headlight, allowing the bulb inside to be extracted and replaced with a new one; after replacement, reassemble all the removed parts.

Watch the video!


by ScegliAuto

More videos