Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Sh 150
Part: Wheel

Today we will explain how to remove the rear wheel of the 2005 Honda SH 150. The first two steps to be carried out are to remove the lower cover and the one of the battery and spark plugs compartment; to perform this operation we should unscrew the screws. The third and fourth steps consist of disconnecting the scooter's battery and unscrewing the bolts that secure the exhaust using a 14 mm wrench. The fifth and sixth steps consist of disconnecting the exhaust connector and removing it. The seventh and eighth steps consist of removing the shock absorber by unscrewing the bolts and disconnecting the connector and then removing the pins that secure the wheel. The ninth and final step is to remove the rear wheel.

Posted on 1 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to mount the front wheel on the Honda SH 150
How to mount the front wheel on the Honda SH 150
Sh 150 Today we will explain how to mount the front wheel on the Honda SH 150 motorcycle. To mount the front wheel, we need to lift our vehicle so that we c…
How to Remove the Rear Wheel of the Honda SH 150i
How to Remove the Rear Wheel of the Honda SH 150i
Sh 150 Below are the instructions that will allow you to remove and replace the rear wheel or tyre of the Honda SH 150i scooter. First, place your scooter o…
How do you replace the air filter of the Honda SH 150?
How do you replace the air filter of the Honda SH 150?
Sh 150 It will be possible to replace the air filter of the Honda SH 150 by loosening the screws that secure the filter housing, which will be located near …

How to Replace the Coolant in the Piaggio Medley 125?

To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant.

Watch the video!


by ScegliAuto

More videos