Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service on the Honda ADV 150 scooter?

Model: Honda Adv 150
Part: Service warning light

Video tutorial

In this tutorial, we will see how to reset the service on the Honda ADV 150 scooter, an extremely simple and quick operation that should be done only after completing all scheduled maintenance tasks. First, we insert the key and leave it in the initial position.

Then, we press and hold the "SET" button located on the right side of the dashboard while simultaneously turning on the instrument panel. We then keep the button pressed until the warning light disappears from the display.

Finally, we restart the instrument panel and check that the reset was successful.


Posted on 28 November 2025 by ScegliAuto


Related tutorials

How to reset the service on a Honda ADV 150 scooter?
How to reset the service on a Honda ADV 150 scooter?
Adv 150 Resetting the service on a Honda ADV 150 scooter, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure th…
How to reset the service light on the Honda ADV 150 scooter?
How to reset the service light on the Honda ADV 150 scooter?
Adv 150 Resetting the service on the Honda ADV 150 scooter, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, we…
How to Replace the Battery in a Honda ADV 150 Scooter?
How to Replace the Battery in a Honda ADV 150 Scooter?
Adv 150 In this tutorial, you will see how to replace the battery in a Honda ADV 150 scooter, an extremely simple and quick operation. First, ensure that the…

How to Change the Engine Oil of a Triumph Speed 400?

To change the engine oil of a Triumph Speed 400, start by positioning the bike on a flat surface and ensure the engine is warm but not too hot. Locate the oil filler cap on the engine and unscrew it. Place a collection container under the oil drain plug on the oil sump and unscrew the plug to allow the used oil to drain out. Once the draining is complete, refit the drain plug. Remove and replace the oil filter using an oil filter wrench. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the filler cap opening until it reaches the recommended level, and you will have completed the change.

Watch the video!


by ScegliAuto

More videos