Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Nc 750 X
Part: Clock

To adjust the clock on the Honda NC 750 X, you need to turn on the instrument panel by turning the key in the corresponding ignition switch. Once it is on, you can press and hold the SELECT and MODE buttons. This will give you access to the menu where you can scroll to find the "Clock" option. Selecting it with the SELECT button will cause the hours to start blinking. You can change the hours by pressing the MODE button, and you can confirm the change with the SELECT button, then follow the same procedure for the minutes.

Posted on 19 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you set the clock on the Honda NC 750 X?
How do you set the clock on the Honda NC 750 X?
Nc 750 X In order to set the clock on the Honda NC 750 X, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot. …
How to Replace the Air Filter on a Honda NC 750 X
How to Replace the Air Filter on a Honda NC 750 X
Nc 750 X These brief and simple instructions will illustrate the procedure for removing and replacing the engine air filter on a Honda NC 750 X. First, place …
How to Replace the Battery on a Honda NC 750 X
How to Replace the Battery on a Honda NC 750 X
Nc 750 X In a few simple steps, we will see how to remove and replace the battery of the Honda NC 750 X motorcycle. First, place the motorcycle on a stand and…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos