Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service on the Honda Forza 250 scooter?

Model: Honda Forza 250
Part: Service warning light

Video tutorial

In this tutorial, we will see how to reset the service light on the Honda Forza 250 scooter. This operation is extremely simple and quick, and should only be done after completing all scheduled maintenance tasks.

First, insert the key and leave it in the initial position. Then, press and hold both the "Info A" button and the "Info B" button while simultaneously turning on the instrument panel.

Next, keep both buttons pressed until the screen starts to blink. Press the "Info B" button twice in succession, and complete the procedure by restarting the instrument panel.


Posted on 25 December 2025 by ScegliAuto


Related tutorials

How to Reset the Service on the Honda Forza 250 Scooter?
How to Reset the Service on the Honda Forza 250 Scooter?
Forza 250 .. In this tutorial, you will see how to reset the service on the Honda Forza 250 scooter, a very simple and quick operation, to be performed.. …
How to Reset the Service on a Honda Forza 250 Scooter?
How to Reset the Service on a Honda Forza 250 Scooter?
Forza 250 In this tutorial, see how to reset the service on a Honda Forza 250 scooter, a very simple and quick operation to perform only after completing all s…
How to reset the service on the Honda Forza 250 scooter?
How to reset the service on the Honda Forza 250 scooter?
Forza 250 .. In this tutorial we can see how to reset the service on the Honda Forza 250 scooter, an extremely simple and quick operation, to.. …

How to change the engine oil of a Yamaha MT-07?

To change the engine oil of a Yamaha MT-07, follow these steps. Start by placing the bike on a flat surface and ensure the engine is warm but not too hot. Remove the oil cap from the top of the engine and unscrew the oil drain plug on the engine casing, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew the plug to completely drain the used oil. Once drained, refit the drain plug. Remove and replace the oil filter using an oil filter spanner. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the oil opening until reaching the recommended level. Check the oil level using the dipstick and add oil if necessary. Refit the oil cap and ensure it is securely tightened. Start the engine and let it run for a few minutes to distribute the oil, and you will have completed the procedure.

Watch the video!


by ScegliAuto

More videos