Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, we will see how to replace the headlight bulb on the Honda CB500X, an extremely simple and quick operation. First of all, let's make sure that the key is not inserted, so we can operate in complete safety. Then, we will remove the lower cover of the dashboard by unlocking the two plastic rivets. Next, we will disconnect the power connector, remove the rubber circular cap, and unclip the metal clip. At this point, all that's left is to extract the old bulb, insert the replacement, and reassemble everything by following the reverse procedure.

Posted on 3 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on a Honda CB500X?
How to Replace the Front Headlight Bulb on a Honda CB500X?
Cb500x Before you begin, position your Honda CB500X on the side stand. Start by unfastening the clips that secure the rear cover of the bulb, located beneat…
How to Replace the Air Filter on a Honda CB500X?
How to Replace the Air Filter on a Honda CB500X?
Cb500x Replacing the air filter on the Honda CB500X, as shown in this tutorial, is a very simple and quick operation. First, remove the seat, then loosen th…
How to replace the motor oil in the Honda CB500X?
How to replace the motor oil in the Honda CB500X?
Cb500x In this tutorial we can see how to replace the motor oil in the Honda CB500X, an extremely simple and fast operation. First of all, make sure that th…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos