Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Air Filter on a Honda SH 150

Model: Honda Sh 150
Part: Air filter

This video is currently unavailable

To replace the air filter on this scooter, follow these instructions. Unscrew the perimeter screws on the filter cover: once all screws are removed, you can take off the cap and extract the filter from its housing.

After replacing the old cartridge with a new one, you can reposition everything inside the container (first cleaning it and, if necessary, the exhaust pipe at its end). Re-screw all the screws of the cover, and the job is done. It is recommended to use parts of the type prescribed by the manufacturer.


Updated on 8 March 2026 by ScegliAuto


Related tutorials

Sh 150 To replace the air filter of the Honda SH 150, access the rear of the bike, where the casing containing the air filter is located, just above the tra…
Sh 150 It will be possible to replace the air filter of the Honda SH 150 by loosening the screws that secure the filter housing, which will be located near …
Sh 150 To service the Honda SH 150, first replace the air filter. To access it, remove the bolts securing the cover above the gearbox. Once the cover is rem…

How to Replace the Fork on a Peugeot Kisbee?

To replace the fork on a Peugeot Kisbee, loosen the bolts securing the front wheel to its housing: you will need to unscrew the bolts that hold the corresponding nut to remove the central axle of the wheel. Next, disconnect the brake caliper from the disc and proceed by unscrewing the bolts of the fairings that surround the fork: at this point, you can loosen the bolts that secure the fork to the steering, allowing you to insert the new one. This can then be secured to the steering, covered with the fairing, and the front wheel installed.

Watch the video!


by ScegliAuto

More videos