Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
These brief and simple steps will allow us to replace the engine coolant of the Honda CBR 600 RR motorcycle. First, we place the motorcycle on the stand and begin by removing the entire right side fairing, unscrewing all the fastening screws; then we proceed to unscrew the drain screw on the water pump cover, letting the fluid drain into a container, as shown in the video. At this point, we unscrew the cap of the radiator reservoir and then refill it with the new coolant (filling it to the maximum level).

Posted on 6 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Coolant in the Honda CBR 600 RR
How to Replace the Coolant in the Honda CBR 600 RR
Cbr 600 Rr In this video, you will see how to replace the coolant in the Honda CBR 600 RR, following the instructions provided below. First, drain the old coola…
How to Replace the Coolant on the Honda CBR 600RR
How to Replace the Coolant on the Honda CBR 600RR
Cbr 600 Rr In this video tutorial, you will learn how to replace the coolant and flush the system on the Honda CBR 600 RR by following these simple steps. First…
How to replace the spark plugs of the Honda CBR 600 RR
How to replace the spark plugs of the Honda CBR 600 RR
Cbr 600 Rr In this guide we will see the main instructions on how to disassemble and replace the spark plugs of the engine of the Honda CBR 600 RR motorcycle. F…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos