Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on the Honda NC 750 X

Model: Honda Nc 750 X
Part: Brake pads

Video tutorial

The instructions in this guide will show you how to disassemble and replace the front brake pads on the Honda NC 750 X. First, place the motorcycle on a stand and begin unscrewing the fixing screws of the front brake caliper to remove it from the disc; then apply pressure to the caliper piston to retract it, thus removing the old brake pads, as illustrated in the video.

At this point, clean the caliper from any residual dirt, then install the new original brake pads; refit the caliper and perform the same operation on the other front brake caliper.


Posted on 11 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on the Honda NC 750X
How to Replace the Front Brake Pads on the Honda NC 750X
Nc 750 X Let’s go through the step-by-step procedure to remove and replace the front brake pads on the Honda NC 750X motorcycle. First, place the motorcycle o…
Replacing the Rear Brake Pads on a Honda NC 750 X
Replacing the Rear Brake Pads on a Honda NC 750 X
Nc 750 X Today, you will learn a simple operation: replacing the rear brake pads on a Honda NC 750 X. First, remove the caliper from the brake disc by unscrew…
How to replace the rear brake pads on a Honda NC 750X
How to replace the rear brake pads on a Honda NC 750X
Nc 750 X Here are the instructions to remove and replace the rear brake pads on the Honda NC 750X motorcycle. First, place your motorcycle on the centre stand…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos