Do it yourself
Frequently asked questions about cars and motorcycles

Model: Honda Adv 350
Part: Brake pads

Today, you will discover the instructions for replacing the front brake pads on a Honda ADV 350. First, place the central stand and begin unscrewing the screws securing the front brake pads, removing them from the discs; then apply pressure to the caliper piston, thus removing the old pads. Next, clean the caliper of any residual dirt, installing the new original brake pads; reassemble the brake caliper, securing it to the disc with the two screws, following the video until the end!

Posted on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Adv 350 To replace the exhaust on the Honda ADV 350, you need to loosen the screws that secure the exhaust terminal to its housing. Once the screws are remov…
Adv 350 In this tutorial, you will learn how to change the engine oil in the Honda ADV 350 scooter, a very simple and quick operation to perform every year. …
Adv 350 To replace the exhaust on the Honda ADV 350, loosen the screws that secure the exhaust end can to its housing: once the screws are loosened, you can …

How to Reset the Service Light on the Yamaha Xmax 250?

To reset the service light on the Yamaha Xmax 250, you need to insert the ignition key into the appropriate slot, so that you can turn it and switch on the instrument panel. Once this is done, press and hold the central button located on the left side of the instrument panel: the button should be held for about 20 seconds. When released, you will notice that the flashing service light has turned off: to verify that the reset has occurred correctly, you will need to switch off and then switch on the vehicle's instrument panel.

Watch the video!


by ScegliAuto

More videos