Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on the Honda CBF 125

Model: Honda Cbf 125
Part: Engine oil

Video tutorial

You can change the engine oil on the Honda CBF 125 by unscrewing the drain plug of the oil sump located at the central lower part of the bike: once the plug is unscrewed, proceed to let all the used oil flow into a suitably positioned container. At this point, you can also remove the oil filter from its seat to insert a new one; you can conclude the operation by topping up, pouring the necessary amount of oil through the breather located on the right side of the bike.


Posted on 24 June 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter on a Honda CBF 125
How to Change the Engine Oil and Oil Filter on a Honda CBF 125
Cbf 125 In short, you will see the procedure for changing the engine oil and oil filter while performing the routine maintenance service on the Honda CBF 125…
How do you replace the engine oil of the Honda CBF 125?
How do you replace the engine oil of the Honda CBF 125?
Cbf 125 In order to replace the engine oil of the Honda CBF 125, you need to loosen the drain plug located at the bottom of the motorcycle: once this plug ha…
How to Change the Engine Oil in a Honda CBF 125
How to Change the Engine Oil in a Honda CBF 125
Cbf 125 Changing the engine oil in a Honda CBF 125, as shown in this tutorial, is an extremely simple and quick operation. First, wait until the engine is co…

How to Replace the Air Filter on a Honda SH 300i Scooter?

In this tutorial, you will see how to replace the air filter on a Honda SH 300i scooter, a very simple and quick operation. Before proceeding, ensure the engine is completely cold for safety. Start by unscrewing both the 6 screws around the perimeter of the airbox and the 3 bolts of the circular cover, then remove the cover and unscrew the additional screw that has just been freed. Next, separate the box, remove the old filter, and clean the housing of any dirt residue. Finally, follow the reverse procedure to install the replacement.

Watch the video!


by ScegliAuto

More videos