Do it yourself
Frequently asked questions about cars and motorcycles

Model: Honda Cbf 125
Part: Engine oil

In short, you will see the procedure for changing the engine oil and oil filter while performing the routine maintenance service on the Honda CBF 125 motorcycle. First, place the motorcycle on its centre stand and begin unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean or replace the small oil filter as shown in the video. Next, unscrew the filler cap and top up with the correct type of new engine oil, pouring in the right amount!

Updated on 4 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Cbf 125 You can change the engine oil on the Honda CBF 125 by unscrewing the drain plug of the oil sump located at the central lower part of the bike: once t…
Cbf 125 In order to replace the engine oil of the Honda CBF 125, you need to loosen the drain plug located at the bottom of the motorcycle: once this plug ha…
Cbf 125 Changing the engine oil in a Honda CBF 125, as shown in this tutorial, is an extremely simple and quick operation. First, wait until the engine is co…

How to Replace the Drive Belt of the Piaggio Vespa 50 ET2

Today, we will discover the instructions that will allow us to dismantle and replace the drive belt of the Piaggio Vespa 50 ET2. First, place the scooter on the stand and start unscrewing all the fixing screws found on the side of the transmission cover to remove it; then unscrew the screw of the fan and the variator, subsequently removing the drive belt, as shown in the video. At this point, install the new toothed belt, as well as the original one, correctly refitting the fan and finally the side cover of the transmission.

Watch the video!


by ScegliAuto

More videos