Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Cbf 1000
Part: Brake pads

You can replace the front brake pads on the Honda CBF 1000 by loosening the bolts that secure the brake caliper to its housing. Once the bolts are loosened, detach the caliper from the disc so you can remove the pin that holds the pads in place. At this point, proceed to remove the pads from inside the caliper and then position the new ones: these can now be secured with the pin, and the caliper can be reinstalled on the disc, ensuring everything functions correctly.

Posted on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on a Honda CBF 1000 GT
How to Replace the Front Brake Pads on a Honda CBF 1000 GT
Cbf 1000 You can replace the front brake pads on a Honda CBF 1000 GT by loosening the bolts that secure the brake caliper to the disc: once the fixing bolts a…
How to Replace the Rear Brake Pads on a Honda CBF 1000
How to Replace the Rear Brake Pads on a Honda CBF 1000
Cbf 1000 To replace the rear brake pads on a Honda CBF 1000, loosen the screws that secure the brake caliper to the corresponding disc so that it can be compl…
How to change the engine oil in the Honda CBF 1000?
How to change the engine oil in the Honda CBF 1000?
Cbf 1000 You can carry out the engine oil change on the Honda CBF 1000 by loosening the drain plug located at the central lower part of the vehicle: once this…

How to set the time on the Suzuki Burgman 125 scooter?

In this tutorial, you will see how to set the time on the Suzuki Burgman 125 scooter, a very simple and quick operation, for example, after changing the hour or replacing the battery. First, insert the key, then turn on the instrument cluster and press both the 'SEL' and 'ADJ' buttons located on the dashboard for about three seconds. At this point, adjust the hour by repeatedly pressing the 'SEL' button, set the minutes with the 'ADJ' button, and save the setting by pressing both buttons again. Finally, restart the instrument cluster to complete the procedure.

Watch the video!


by ScegliAuto

More videos