Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the motor oil of a Harley Davidson Softail, start by positioning the motorcycle on a stable stand to ensure safety and easy access. Wait for the engine to cool down if it has been recently running. Locate the oil drain plug, which is located under the engine or near the frame, and place a container to collect the used fluid. Remove the plug carefully, allowing the oil to drain completely. Once the tank is empty, reinstall the plug making sure it is tightly secured to prevent leaks. Pour the new oil into the tank, using the quantity and type specified in the owner's manual. After completing the filling, check the oil level with the dipstick and, if necessary, add more fluid. Briefly start the engine to circulate the new oil, then check the level again and adjust if needed.

Posted on 21 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to change the motor oil of a Harley Davidson Softail?
How to change the motor oil of a Harley Davidson Softail?
Softail To change the motor oil of a Harley Davidson Softail, first make sure that the motorcycle is warm, as warm oil facilitates complete drainage. After t…
How to Change the Engine Oil and Oil Filter on a Harley Davidson Softail
How to Change the Engine Oil and Oil Filter on a Harley Davidson Softail
Softail The following steps will guide you through performing routine maintenance by changing the engine oil and oil filter on a Harley Davidson Softail. Fir…
How to change the motor oil of a Harley Davidson Softail Heritage?
How to change the motor oil of a Harley Davidson Softail Heritage?
Softail To change the motor oil of a Harley Davidson Softail Heritage, start by warming up the engine for a few minutes so that the oil becomes more fluid an…

How to Replace the Coolant in the Piaggio Medley 125?

To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant.

Watch the video!


by ScegliAuto

More videos