Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant in the Piaggio Medley 125?

Model: Piaggio Medley 125
Part: Antifreeze coolant

This video is currently unavailable

To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container.

Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant.


Updated on 6 July 2026 by ScegliAuto


Related tutorials

How to Replace the Battery of a Piaggio Medley 125?
How to Replace the Battery of a Piaggio Medley 125?
Medley 125 Let’s talk about the Piaggio Medley 125 scooter, for which we have a video presentation below, focusing on the correct procedure to replace the 12-vo…
How do you replace the exhaust pipe of the Piaggio Medley 125?
How do you replace the exhaust pipe of the Piaggio Medley 125?
Medley 125 It will be possible to replace the exhaust of the Piaggio Medley 125 by loosening the screws that fix the exhaust terminal to its supports, at the re…
How to Replace the Battery on a Piaggio Medley 125?
How to Replace the Battery on a Piaggio Medley 125?
Medley 125 To replace the battery on a Piaggio Medley 125, loosen the screws securing the internal trim panel located at the bottom right of the ignition switch…

How to Reset the Service Light on the Gilera Nexus 500

This video shows the procedure to reset the service light on the Gilera Nexus when the light remains on after a service. The procedure is straightforward and takes less than a minute. To reset the light, press the mode button and the odo/set button simultaneously. While holding them down, turn the ignition key to the ON position. Once the instruments are on, release the buttons and press the mode button once. The maintenance light will illuminate; hold the mode button for a few seconds to reset it.

Watch the video!


by ScegliAuto

More videos