Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
It will be possible to replace the exhaust of the Piaggio Medley 125 by loosening the screws that fix the exhaust terminal to its supports, at the rear wheel on the right side of the motorcycle: once the screws have been removed, it will be possible to proceed by widening the connecting clamp located between the exhaust and the exhaust manifold so that the terminal can be completely removed. The new exhaust can now be positioned so that it can be connected and checked that everything works correctly.

Posted on 16 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on the Piaggio Medley 125?
How to Change the Engine Oil on the Piaggio Medley 125?
Medley 125 To change the engine oil on the Piaggio Medley 125, loosen the drain plug of the oil tank, located at the bottom of the scooter. Once the drain plug …
How to Replace the Coolant in the Piaggio Medley 125?
Medley 125 To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator unde…
How do you check the oil level of the Piaggio Medley?
How do you check the oil level of the Piaggio Medley?
Medley 125 In order to check the oil level of the Piaggio Medley 125, you need to locate the dipstick for oil level check, positioned on the right side of the m…

Servicing a Honda SH300 Scooter

How to service the SH 300 scooter. This operation should be done with the engine cold. Remove the cover and take out the air filter, cleaning the compartment where the new one will be placed. Refit the three screws you removed earlier and reassemble the cover. Remove the oil cap, take a 12 mm spanner and unscrew the oil plug from underneath. Allow the oil to drain into a suitable container, which you will then dispose of at an authorised centre. Remove the filter, clean the cavity where the new one will be fitted, and tighten it with the spanner. Refit the oil cap screw. Always change the washer on the cap. Now, refill with oil. You will need a synthetic oil like Motul 5100 10W40, which costs £12.40 per litre on Amazon. If you are doing a complete change, you will need two cans, as you will require 1.6 litres including the filter. After adding the oil, let it rest for a few minutes, then run the engine for a few minutes and check the level. If necessary, top it up: it should be halfway between min and max.

Watch the video!


by ScegliAuto

More videos