Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the motor oil of a Harley Davidson Softail, first make sure that the motorcycle is warm, as warm oil facilitates complete drainage. After turning off the engine and placing the motorcycle in a vertical position or on a stand, locate the drain plug under the engine. Place a container under the plug and remove it with a suitable wrench, allowing the old oil to drain until the flow stops. Finally, reinstall the drain plug, making sure it is securely tightened to prevent leaks. Then proceed to fill the oil tank with the specified amount of new oil for Softail, using a funnel to avoid splashing. Afterwards, check the oil level with the dipstick, start the motorcycle for a moment, and then turn it off to verify that the level is still correct, adding more if necessary.

Posted on 8 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to change the motor oil of a Harley Davidson Softail Heritage?
How to change the motor oil of a Harley Davidson Softail Heritage?
Softail To change the motor oil of a Harley Davidson Softail Heritage, start by warming up the engine for a few minutes so that the oil becomes more fluid an…
How do you replace the motor oil of the Harley Davidson Softail?
How do you replace the motor oil of the Harley Davidson Softail?
Softail To ensure that the motor oil of the Harley Davidson Softail is replaced, it will be necessary to loosen the drain plug located in the central lower p…
How to Change the Engine Oil on a Harley Davidson Softail?
How to Change the Engine Oil on a Harley Davidson Softail?
Softail Changing the engine oil on a Harley Davidson Softail involves loosening the drain plug on the oil sump, located at the bottom centre of the bike. Onc…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos