Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Cbf 1000
Part:

To replace the levers on the Honda CBF 1000, loosen the screw located at the base of the lever. Once loosened, you can pull it out from the top. After removing the screw, you can slide the lever out without disconnecting any cables. Repeat the same process on the opposite side to replace both levers. Insert the new levers into their housing and secure them with the screws you previously removed, ensuring everything functions correctly.

Updated on 1 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the engine oil in the Honda CBF 1000?
How to change the engine oil in the Honda CBF 1000?
Cbf 1000 You can carry out the engine oil change on the Honda CBF 1000 by loosening the drain plug located at the central lower part of the vehicle: once this…
How to Replace the Front Brake Pads on a Honda CBF 1000 GT
How to Replace the Front Brake Pads on a Honda CBF 1000 GT
Cbf 1000 You can replace the front brake pads on a Honda CBF 1000 GT by loosening the bolts that secure the brake caliper to the disc: once the fixing bolts a…
How to Replace the Front Brake Pads on a Honda CBF 1000?
How to Replace the Front Brake Pads on a Honda CBF 1000?
Cbf 1000 You can replace the front brake pads on the Honda CBF 1000 by loosening the bolts that secure the brake caliper to its housing. Once the bolts are lo…

How to Replace the Front Headlight on the Husqvarna 701?

In this tutorial, you will see how to replace the front headlight on the Husqvarna 701, a very simple and quick operation. First, ensure that the key is not inserted, then position yourself in front of the motorcycle, locate the four bolts on either side of the headlamp, and unscrew them using a Torx T30 key. Next, pull the entire assembly towards you, separate it from the support, and disconnect the power connector. At this point, you can separate the headlight from the panel, position the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos