Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Honda
    3. : Crf 250f

Changing the Engine Oil and Oil Filter on the Honda CRF 250F

Model: Honda Crf 250f
Part: Engine oil

Video tutorial

Let's see how to perform routine maintenance by changing the engine oil and oil filter on the Honda CRF 250F motorcycle. First, place the bike on a stand and start unscrewing the engine oil drain bolt, allowing it to drain into a container for about ten minutes; unscrew the screws of the oil filter cover located at the bottom right, removing and replacing the cartridge with a new one, as shown in the video.

At this point, unscrew the filler cap and top up with new engine oil, adding the correct amount; screw the filler cap back on and start the engine.


Posted on 2 November 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil and Oil Filter on the Honda CRF 250L
How to Replace the Engine Oil and Oil Filter on the Honda CRF 250L
Crf 250l Today, replace the engine oil and oil filter on the Honda CRF 250L. First, place your bike on the centre stand and start by loosening the oil drain b…
How do you replace the air filter of the Honda CRF 250F?
How do you replace the air filter of the Honda CRF 250F?
Crf 250l To remove the air filter of the Honda CRF 250F, you will need to loosen the screws that secure the triangular cover panel located on the right side o…
How to Service the Honda CRF 300 L
How to Service the Honda CRF 300 L
Crf 300 L In today's video, we will see the steps to replace the engine oil and oil filter, performing the routine maintenance service on the Honda CRF 300 L e…

How to Change the Engine Oil in a Ducati Panigale 959?

As shown in this tutorial, changing the engine oil in a Ducati Panigale 959 is an extremely simple and quick operation. First, ensure the engine is sufficiently cool, then position a container underneath the bike, locate the drain bolt and unscrew it using a 14mm spanner. Allow all the oil in the system to drain out, then open the filter cap and remove it. At this point, insert the replacement, reassemble everything, and add the required amount of oil through the designated hole.

Watch the video!


by ScegliAuto

More videos