Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Honda
  4. : Nc700x

Model: Honda Nc700x
Part: Battery

Open the under-seat compartment using the ignition key. The battery is located behind the rear panel of this compartment, so remove the two screws that secure it. Disconnect the strap holding the battery in place, then unscrew and disconnect the two terminals using a 10 mm socket (always start with the negative terminal and only then unscrew the positive). At this point, you can simply pull the battery out by hand, as shown in the video, then insert the new one and reverse the steps until fully reassembled. As you can see, this is a really simple task.

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Nc700x To change the motor oil of a Honda NC700, start by warming up the engine for a few minutes to make the oil more fluid, then turn off the engine. Plac…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos