Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Honda
    3. : Nc700x

Model: Honda Nc700x
Part: Engine oil

To change the motor oil of a Honda NC700, start by warming up the engine for a few minutes to make the oil more fluid, then turn off the engine. Place the motorcycle on a center stand to ensure stability. Locate the oil drain plug under the engine and position a collection pan underneath it. Use a wrench to loosen the drain plug and let the oil drain completely into the pan. Once all the oil has been drained, replace the drain plug and tighten it securely. Find the oil fill cap on the side of the engine and remove it. Use a funnel to slowly pour the recommended amount of new oil as stated in the owner's manual. After completing the refill, replace the fill cap and tighten it securely. Start the engine and let it run for a few minutes to distribute the new oil, then turn it off and check for any leaks.

Posted on 15 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Battery Replacement on Honda NC700X
Battery Replacement on Honda NC700X
Nc700x Open the under-seat compartment using the ignition key. The battery is located behind the rear panel of this compartment, so remove the two screws th…

How to Top Up the Oil in the Aprilia SR 50 R Scooter?

In this tutorial, you will see how to top up the oil in the Aprilia SR 50 R scooter, a very simple and quick operation to perform periodically. First, open the small lower compartment and retrieve the supplied tools, then remove the screws securing the front panel located at the back. Once removed, locate the oil reservoir, which is on your left, and unscrew the cap. At this point, proceed to top up the oil until you reach the optimal level, then reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos