Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Oil Filter Change on Honda CB 500F

Model: Honda Cb 500f
Part: Engine oil

Video tutorial

In this video, you will see how to change the engine oil and oil filter, performing the regular maintenance service, on a Honda CB 500F. First, unscrew the oil drain bolt, allowing it to drain into a container for about ten minutes; meanwhile, remove the oil filter, which is located near the exhaust headers, as shown in the video.

Replace the filter with a new one, remembering to screw it in and tighten it by hand, and finally, add the new engine oil; fill the engine sump to the maximum level!


Updated on 11 April 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter of the Honda CB 500F
How to Change the Engine Oil and Oil Filter of the Honda CB 500F
Cb 500f Today's procedure will show you how to perform routine maintenance by changing the engine oil and oil filter on the Honda CB 500F motorcycle. First, …
How to Service the Honda CB 500F
How to Service the Honda CB 500F
Cb 500f Today, we will guide you through the necessary steps to service the Honda CB 500F, replacing the engine oil and oil filter. First, place your bike on…
How to check the oil level of the Honda CB 500F?
How to check the oil level of the Honda CB 500F?
Cb 500f To check the oil level of the Honda CB 500F, look at the right side of the bike, corresponding to the casing that contains the engine oil: at the bot…

How to Replace the Remote Battery of the Ducati Multistrada?

Replacing the remote battery of the Ducati Multistrada, as shown in this tutorial, is an extremely simple and quick operation. You will need a replacement CR2032 battery and, if necessary, a small flat-head screwdriver. First, grasp the rear cover, then push it down firmly to detach it from the remote. Next, remove the circular white cap, take out the old battery, and insert the new one, ensuring the correct polarity. Finally, reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos