Do it yourself
Frequently asked questions about cars and motorcycles
In today's video, learn how to remove and replace the front headlight bulb on a Honda CBF 125 motorcycle in simple and quick steps. First, remove any fairing by unscrewing the fixing screws; then remove the side fairings by unscrewing the screws, as shown in the video. At this point, unscrew the four nuts of the instrument cluster to move it away and access the bulb, disconnecting the speedometer cable; now disconnect the electrical connector of the bulb and release the metal clip to remove it and replace it with the new one!

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Cbf 125 In this tutorial we can see how to replace the rear headlight bulb in the Honda CBF 125, a very simple and quick operation. First of all, make sure t…
Cbf 125 To replace the battery installed on the Honda CBF 125, you will need to remove the seat from its housing: once removed, you can locate the relevant c…
Cbf 125 To replace the battery in the Honda CBF 125, insert the ignition key into its lock to turn it and completely remove the seat. Once the seat is remove…

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos