Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the position bulb on a Honda SH 150, simply follow the easy steps shown in this video. Essentially, unscrew the two Allen screws located at the top between the front shield and the handlebar assembly. Once unscrewed, using just your hands without forcing too much to avoid breaking the plastic clips, you should be able to remove the front cover with the Honda logo. This way, you can access the position lights that are attached laterally with a clearly visible electrical connector. The bulbs are T10, and you can buy two for about £5.

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Bulb and Dashboard of the Honda SH 150
How to Change the Bulb and Dashboard of the Honda SH 150
Sh 150 This guide shows the procedure for removing and replacing the bulb and dashboard for the 2013 Honda SH 150. Models of SH up to 2016 are suitable for …
How to Replace the Front Headlamp Bulb on a Honda SH 150 Scooter
How to Replace the Front Headlamp Bulb on a Honda SH 150 Scooter
Sh 150 Replacing the front headlamp bulb on a Honda SH 150 scooter is an extremely simple and quick task. First, ensure the key is not in the ignition. Then…
How do you replace the rear headlight bulb of the Honda SH 150?
How do you replace the rear headlight bulb of the Honda SH 150?
Sh 150 In order to replace the rear headlight bulb of the Honda SH 150, you need to loosen the screws that hold the panel located at the top of the rear fen…

How do you adjust the headlights of the Kymco Xciting S 400i?

In order to adjust the headlights of the Kymco Xciting S 400i, you need to completely remove the panel that is located under the front headlight and on the top of the front fork. Once this panel has been removed, you will be able to locate the bolts underneath that allow you to adjust the angle of the headlight. By tightening this bolt, you will notice that the beam of light from the headlight will rise; conversely, by loosening the bolt, you will notice that the beam will lower. Once the adjustment is complete, you can reinsert the panel.

Watch the video!


by ScegliAuto

More videos