Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Place the bike on a stand and remove the left side bolt of the front wheel, as shown in the video. Next, unscrew the bolts securing the brake caliper to the disc, and remove it using a flat screwdriver or a lever. Now, also remove the wheel and unscrew the bolts holding the brake disc, which you can then take off to fit the new disc. Refit the wheel with the new disc and tighten the securing bolt. Remove the worn pads from the caliper, widen the slots using a crowbar or flat screwdriver, and insert the new ones. Reattach the caliper to the brake disc.

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Brake Pads on a Honda PCX 125?
How to Replace the Brake Pads on a Honda PCX 125?
Pcx 125 You can replace the brake pads on the Honda PCX 125 by loosening the screws that secure the brake caliper to the corresponding disc. Once the screws …
How to replace the tire of the Honda PCX 125
How to replace the tire of the Honda PCX 125
Pcx 125 Today's main steps will show us how to disassemble and replace the front tire of the Honda PCX 125 scooter. First, we put the scooter on the center s…
Transmission Belt Replacement on Honda PCX 125
Transmission Belt Replacement on Honda PCX 125
Pcx 125 Today, you will see the instructions that will allow you to disassemble and replace the transmission belt of the Honda PCX 125 scooter. First, place …

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos