Do it yourself
Frequently asked questions about cars and motorcycles

Model: Honda Cb 650
Part: Engine oil

Today, you will learn how to perform routine maintenance by changing the oil and oil filter on a Honda CB 650 SC. First, place the bike on its centre stand and warm up the engine for a couple of minutes; then remove the drain bolt located under the engine, allowing the oil to drain into a container for about ten minutes. At this point, unscrew the oil filter screw using a 12 mm spanner, remove it, and replace it with the new one; lubricate the gasket and reassemble everything, filling the sump with the new oil!

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Cb 650 In this video tutorial, you will learn how to change the engine oil on a Honda CB 650, following the instructions below. First, unscrew the oil drain…
Cb 650 In this guide, you will find the main instructions to carry out the routine maintenance service, replacing the engine oil and oil filter on the Honda…
Cb 650 To change the engine oil of a Honda CB 650, loosen the drain plug located at the bottom centre of the bike. Once the plug is removed, collect the use…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos