Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Cb 650
Part: Engine oil

In this video tutorial, you will learn how to change the engine oil on a Honda CB 650, following the instructions below. First, unscrew the oil drain bolt located at the bottom of the engine casing; allow the oil to drain into a container and wait about twenty minutes before screwing the plug back in. Next, unscrew the oil filter screw located between the exhaust headers and remove it, replacing it with a new one. Finally, pour the new oil, with the correct specifications, into the designated upper hole and fill to the appropriate level!

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Number Plate Holder from a Honda CB650
How to Remove the Number Plate Holder from a Honda CB650
Cb 650 Before starting, position your Honda CB650 on its side stand. Begin by removing the two seats from the bike by unscrewing the fixing bolts. Next, uns…
Replacing Engine Oil and Oil Filter on a Honda CB 650 SC
Replacing Engine Oil and Oil Filter on a Honda CB 650 SC
Cb 650 Today, you will learn how to perform routine maintenance by changing the oil and oil filter on a Honda CB 650 SC. First, place the bike on its centre…
How to Service (Oil Change) the Honda CB 650R
How to Service (Oil Change) the Honda CB 650R
Cb 650 In this guide, you will find the main instructions to carry out the routine maintenance service, replacing the engine oil and oil filter on the Honda…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos