Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Sh125i
Part: Headlight

This guide shows how to replace the headlight bulb of a 2014 Honda SH125i. After securing the scooter, unscrew the two screws located on the steering column. Then, gently push the plastic cover forward to remove it. Unscrew the two screws on the front of the scooter above the headlight. Remove the screw located beneath the headlight. Carefully pull off the front fairing, taking care not to apply too much force to avoid damaging the headlight's electrical connections. Remove the protective cap from the bulb holder and disconnect the headlight's retaining clip. Remove the bulb and install a new one that meets the manufacturer's specifications. Reassemble everything and check its proper operation.

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light of the Honda SH 125
How to Reset the Oil Light of the Honda SH 125
Sh125i To manually reset the engine oil change light on your Honda SH 125, follow the instructions in this guide. First, completely switch off the motorcycl…
Resetting the service light on the Honda SH 125
Resetting the service light on the Honda SH 125
Sh125i Close to reaching the mileage expected for the oil change according to the maintenance plan of the Honda SH 125, the message "Oil Change" appears on …
How to Fit the Thermoscud on Honda SH 125 and SH 150
How to Fit the Thermoscud on Honda SH 125 and SH 150
Sh125i In this video, see how to correctly fit the Thermoscud on the Honda SH 125 and SH 150 models from 2017 onwards: open it and lay it over the seat, ens…

How to replace the engine oil in the Kawasaki Versys 1000?

As we can see in this tutorial, replacing the motor oil in the Kawasaki Versys 1000 is an extremely simple and fast operation. First of all, make sure that the engine is cool enough, then position a container under the motorcycle and, using a socket wrench, unscrew the drain plug. Wait for all the oil in the system to completely drain out, remove the lower front cover and unscrew the old filter. At this point, we can tighten the replacement, reassemble everything and pour in the new oil through the appropriate hole.

Watch the video!


by ScegliAuto

More videos