Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Honda
    3. : Nsr 125

Model: Honda Nsr 125

This tutorial begins with the caliper already removed from the bike; for this operation, refer to other videos, but know that it is a very simple job—just unscrew the bolts that secure it in place. Now unscrew the bolt that holds the brake pads in place. If the pistons are stuck, insert a spacer and pump with an air gun to force them out. Ensure that they come out together from the caliper, as explained in the video. Gradually use thinner spacers as the pistons move. Open the caliper and remove them. Install the new ones, and you're done.

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the rear brake pads of the Honda Forza 125.
Replacement of the rear brake pads of the Honda Forza 125.
Forza 125 Today's steps will show us the process of disassembling and replacing the rear brake pads of the Honda Forza 125 scooter. First, we put the scooter o…
How to disassemble the front brake pads of the Honda Forza 125
How to disassemble the front brake pads of the Honda Forza 125
Forza 125 The following steps will show us the process of disassembling and replacing the front brake pads of the Honda Forza 125 scooter. First, we put the sc…
How to Replace the Front Brake Pads on a Honda Forza 125?
How to Replace the Front Brake Pads on a Honda Forza 125?
Forza To replace the front brake pads on a Honda Forza 125, loosen the bolt that secures the brake caliper to the corresponding disc, allowing the caliper …

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos