Do it yourself
Frequently asked questions about cars and motorcycles

Model: Honda Sh 150
Part:

In this video, we will see how to remove the unpainted plastic rear part of the shield of the Honda SH. Start by removing the 4 screws present, then remove the central bolt of the document compartment and the 2 screws of the latch. Now turn the ignition cap counterclockwise to extract it. Remove the two screws of the front shield and detach it from its housing. Carefully disconnect the various cables and the two connectors present. Now you can lift and pull the shield off. After completing the required operations, reassemble the shield by following the previous steps in reverse.

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Sh 150 Below are the instructions that will allow you to remove and replace the rear wheel or tyre of the Honda SH 150i scooter. First, place your scooter o…
Sh 150 In today's video tutorial, you will see the steps to disassemble and replace the headlight bulb on the 2014 Honda SH 150i scooter, as well as the 125…
Sh 150 Today, we will see in this video tutorial how to replace the engine coolant on a Honda SH 150i scooter. First, remove the front cover or fairing of t…

How to Replace the Tyres on the Husaberg FE 450

In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos