|
Do it yourself
| |||
| ||||
Model: Honda Sh 150
Today, we will see in this video tutorial how to replace the engine coolant on a Honda SH 150i scooter. First, remove the front cover or fairing of the scooter; then use a 10 mm socket to unscrew the drain screw for the antifreeze, located on the water pump, allowing the fluid to drain into a container. Now, unscrew the cap of the reservoir to pour in the new coolant, filling it to the maximum level; finally, start the engine and top up if necessary!
Updated on 14 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Sh 150
In this guide, learn how to bleed and replace the radiator fluid or antifreeze on a 2008 Honda SH 150 injection scooter. First, remove the plastic fo…
Sh 150
To replace the coolant on the Honda SH 150, follow these steps: remove the front cover located in front of the radiator by unscrewing the screws on t…
Sh 150
Below are the instructions that will allow you to remove and replace the rear wheel or tyre of the Honda SH 150i scooter. First, place your scooter o…
|
How to Replace the Battery in a Yamaha FZ6?
Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
