Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this guide, learn how to bleed and replace the radiator fluid or antifreeze on a 2008 Honda SH 150 injection scooter. First, remove the plastic footrests by undoing the securing screws; then, unscrew the radiator drain screw using a socket wrench and let the fluid drain into a container. Next, remove the front fairing and open the filler cap of the radiator; fill with the correct new fluid up to the maximum level indicated by a mark!

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Coolant on a Honda SH 150i
How to Replace the Coolant on a Honda SH 150i
Sh 150 Today, we will see in this video tutorial how to replace the engine coolant on a Honda SH 150i scooter. First, remove the front cover or fairing of t…
How to replace the coolant in the Honda SH 150 scooter?
How to replace the coolant in the Honda SH 150 scooter?
Sh 150 In this tutorial we can see how to replace the coolant in the Honda SH 150 scooter, a very simple operation. First of all, make sure that the engine …
How to Remove the Rear Wheel of the Honda SH 150i
How to Remove the Rear Wheel of the Honda SH 150i
Sh 150 Below are the instructions that will allow you to remove and replace the rear wheel or tyre of the Honda SH 150i scooter. First, place your scooter o…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos