Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil in the KTM Duke 250?

Model: Ktm Duke 250
Part: Engine oil

Video tutorial

In this tutorial, you will see how to change the engine oil in the KTM Duke 250, a very simple and quick operation. First, ensure that the engine is cool enough.

Then, position a container underneath and open the filler cap. Next, locate the drain bolt, loosen it using a socket spanner, and remove the secondary filter, which should be cleaned and reinserted. At this point, open the main filter housing, insert the replacement, reassemble everything, and pour in the new oil through the designated hole.


Updated on 24 September 2026 by ScegliAuto


Related tutorials

Duke 250 .. In this tutorial, you will see how to change the engine oil in the KTM Duke 250, a very simple and quick operation. First, wait until.. …
Duke 250 In this tutorial we can see how to replace the motor oil in the KTM Duke 250, an extremely simple and fast operation. First of all, make sure that th…
Duke 250 This tutorial shows how to change the engine oil in a KTM Duke 250, a very simple and quick operation to be performed every 12 months. First, ensure …

How to Replace the Brake Fluid on a Peugeot Citystar 125?

To replace the brake fluid on a Peugeot Citystar 125, you need to connect the tube to the corresponding brake caliper: this will allow you to pump the brake lever, expelling all the old brake fluid from the braking system. Once the fluid has been expelled, disconnect the tube and close the brake caliper again; then, you can loosen the screws that secure the small cap next to the brake lever. Here, you can add the necessary amount of brake fluid, closing the cap afterwards.

Watch the video!


by ScegliAuto

More videos