Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a KTM Duke 250?

Model: Ktm Duke 250
Part: Engine oil

This video is currently unavailable

This tutorial shows how to change the engine oil in a KTM Duke 250, a very simple and quick operation to be performed every 12 months. First, ensure that the engine is sufficiently cool, then place a container underneath, unscrew the drain plug, and remove the secondary filter, which should be cleaned of any residue.

Next, unscrew the second bolt, allow all the oil in the system to drain out, and proceed to open the cap of the main filter housing. Finally, insert the replacement, reassemble everything, and add the required amount of oil through the upper hole.


Updated on 16 October 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in the KTM Duke 250?
How to Change the Engine Oil in the KTM Duke 250?
Duke 250 In this tutorial, you will see how to change the engine oil in the KTM Duke 250, a very simple and quick operation. First, ensure that the engine is …
How to Change the Engine Oil in the KTM Duke 250?
How to Change the Engine Oil in the KTM Duke 250?
Duke 250 In this tutorial, we will see how to change the engine oil in the KTM Duke 250, a very simple and quick operation. First, ensure that the engine is c…
How to change the engine oil in the KTM Duke 250?
How to change the engine oil in the KTM Duke 250?
Duke 250 In this tutorial, you will see how to change the engine oil in the KTM Duke 250, a very simple and quick operation. First, wait until the engine is c…

How to Replace the Brake Fluid on a Peugeot Citystar 125?

To replace the brake fluid on a Peugeot Citystar 125, you need to connect the tube to the corresponding brake caliper: this will allow you to pump the brake lever, expelling all the old brake fluid from the braking system. Once the fluid has been expelled, disconnect the tube and close the brake caliper again; then, you can loosen the screws that secure the small cap next to the brake lever. Here, you can add the necessary amount of brake fluid, closing the cap afterwards.

Watch the video!


by ScegliAuto

More videos