Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil in the KTM Duke 250?

Model: Ktm Duke 250
Part: Engine oil

Video tutorial

In this tutorial, you will see how to change the engine oil in the KTM Duke 250, a very simple and quick operation. First, wait until the engine is cool enough to work safely, then remove the lower protection fairing and place a container underneath the bike.

Next, unscrew the first drain bolt, remove the secondary filter, and clean it of any dirt residue. Continue by removing the second bolt, allowing all the oil in the system to drain out. Open the filter housing and replace the filter.

At this point, simply reassemble everything and pour in the new oil through the designated hole.


Updated on 1 August 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in the KTM Duke 250?
How to Change the Engine Oil in the KTM Duke 250?
Duke 250 .. In this tutorial, we will see how to change the engine oil in the KTM Duke 250, a very simple and quick operation. First, ensure that.. …
How to Change the Engine Oil in the KTM Duke 250?
How to Change the Engine Oil in the KTM Duke 250?
Duke 250 .. In this tutorial, you will see how to change the engine oil in the KTM Duke 250, a very simple and quick operation. First, ensure that.. …
How to Change the Engine Oil in a KTM Duke 250?
Duke 250 This tutorial shows how to change the engine oil in a KTM Duke 250, a very simple and quick operation to be performed every 12 months. First, ensure …

How to Replace the Brake Fluid on a Peugeot Citystar 125?

To replace the brake fluid on a Peugeot Citystar 125, you need to connect the tube to the corresponding brake caliper: this will allow you to pump the brake lever, expelling all the old brake fluid from the braking system. Once the fluid has been expelled, disconnect the tube and close the brake caliper again; then, you can loosen the screws that secure the small cap next to the brake lever. Here, you can add the necessary amount of brake fluid, closing the cap afterwards.

Watch the video!


by ScegliAuto

More videos