Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the motor oil in the KTM Duke 250?

Model: Ktm Duke 250
Part: Engine oil

Video tutorial

In this tutorial we can see how to replace the motor oil in the KTM Duke 250, an extremely simple and fast operation. First of all, make sure that the engine is cool enough, then remove the lower protective cover and place a container underneath the motorcycle.

Next, unscrew the bolts of the two drainage holes with an 18mm wrench and another 17mm wrench, let all the oil in the system drain out and clean both secondary filters from any residue. At this point, all that remains is to open the cap of the main filter, insert the replacement, reassemble everything and pour the new oil through the appropriate hole.


Posted on 27 July 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil in the KTM Duke 250?
How to Change the Engine Oil in the KTM Duke 250?
Duke 250 In this tutorial, we will see how to change the engine oil in the KTM Duke 250, a very simple and quick operation. First, ensure that the engine is c…
How to Change the Engine Oil in the KTM Duke 250?
How to Change the Engine Oil in the KTM Duke 250?
Duke 250 In this tutorial, you will see how to change the engine oil in the KTM Duke 250, a very simple and quick operation. First, ensure that the engine is …
How to change the engine oil in the KTM Duke 250?
How to change the engine oil in the KTM Duke 250?
Duke 250 In this tutorial, you will see how to change the engine oil in the KTM Duke 250, a very simple and quick operation. First, wait until the engine is c…

How to Replace the Brake Fluid on a Peugeot Citystar 125?

To replace the brake fluid on a Peugeot Citystar 125, you need to connect the tube to the corresponding brake caliper: this will allow you to pump the brake lever, expelling all the old brake fluid from the braking system. Once the fluid has been expelled, disconnect the tube and close the brake caliper again; then, you can loosen the screws that secure the small cap next to the brake lever. Here, you can add the necessary amount of brake fluid, closing the cap afterwards.

Watch the video!


by ScegliAuto

More videos