Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Honda Cbr 600f
Part: Air filter

Let’s briefly see how to remove and replace the engine air filter on a 2002 Honda CBR 600F in simple and quick steps. First, remove the seat from your motorcycle, then unscrew the four bolts from the fuel tank; next, lift the tank to access the air filter box, as shown in the video. At this point, remove the top cover to extract and replace the filter; it should be replaced every 12,000 miles, while cleaning should be done every 1,875 miles. Apply the reverse procedure for reassembly!

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the air filter of the Honda CBR 600F?
How do you replace the air filter of the Honda CBR 600F?
Cbr 600f In order to replace the air filter of the Honda CBR 600F, you need to loosen the screws that secure the side panel located on the left side of the mo…
Replacing the Engine Oil and Oil Filter on a Honda CBR 600f
Replacing the Engine Oil and Oil Filter on a Honda CBR 600f
Cbr 600f This guide will show you the steps to perform routine maintenance by replacing the engine oil and oil filter on a Honda CBR 600f. First, place your b…
How to Replace the Battery in the Honda CBR 600F
How to Replace the Battery in the Honda CBR 600F
Cbr 600f In today's video tutorial, you will learn how to remove and replace the battery in the Honda CBR 600F motorcycle. First, place your bike on the stand…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos